Agilent Technologies E8241A Service Guide

Post-Repair Procedures
Post-Repair Procedures Matrix
4-5
Table 4-4 Performance Tests for Assemblies A21 through A32, B1, and RF Output Connector
Performance Tests
The following performance tests are
listed in the order that they should be
performed to minimize changes in test
equipment configurations.
Replaced Assembly
A21 Rear Panel Interface A22 Line Module AT1 115 dB Attenuator A23 Lowband Coupler/Detector A24 20 GHz Coupler A24 40 GHz Coupler A25 20 GHz Detector A25 40 GHz Detector A25B Detector Bias Board A26 MID [Microcircuit Interface Deck] A27 40 GHz Doubler A28 YIG Oscillator A29 20 GHz Doubler A30 Mod Filter with High Power (Option 1EA) A30 Mod Filter with Standard Power A31 Motherboard A32 10 MHz Crystal Oscillator B1 Fan RF Output Connector
Self Tests
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Maximum Leveled Output Power
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Power Level Accuracy
✔✔✔✔✔✔✔✔✔ ✔✔✔✔ ✔
Internal Pulse Modulation Level Accuracy
✔ ✔
Internal Pulse Modulation Rise/Fall Time
✔✔
Internal Pulse Modulation Minimum Pulse Width
✔ ✔
DC FM Carrier Offset
External AM Frequency Response
Internal FM Frequency Response
✔
External Phase Modulation Frequency Response
✔
Internal FM Distortion
Internal Phase Modulation Distortion
External FM Deviation Accuracy
✔
Internal Phase Modulation Deviation Accuracy
✔
External Pulse Modulation ON/OFF Ratio
✔✔
Harmonic Spurious
✔ ✔ ✔ ✔ ✔ ✔
Sub-Harmonic Spurious
✔✔✔
Non-Harmonic Spurious
✔ ✔ ✔
Single-Sideband Phase Noise
✔✔

Agilent Technologies E8241A Specifications

General

Brand	Agilent Technologies
Model	E8241A
Category	Portable Generator
Language	English