Chapter 3: Getting started
PlateLoc User Guide
58
3. Pull the seal out of the slot.
4. Lift the seal roll off of the seal-roll supports.
5. Unscrew one hub from the axle.
6. Remove the roll from the axle.
Related topics
00191
PlateLoc
connections
00191
PlateLoc
connections
Push down the button.
For more information about... See...
Optimization tests “Optimizing seal quality” on page 77
Removing seal that is stuck inside
the PlateLoc
“Hardware problems” on page 88
To Next Page
Loading...
