3Setup Options
Using the Setup Menu
52 U1731C/U1732C/U1733C User’s Guide
Using the Setup Menu
The Setup menu allows you to change a number of
nonvolatile preset features. Modifying these settings affects
the general operation of your LCR meter across several
functions. Select a setting to edit to perform one of the
following:
• Switch between two values, such as on or off.
• Cycle through multiple values from a predefined list.
• Decrease or increase a numerical value within a fixed
range.
The contents of the Setup menu are summarized in
Table 3- 2 on page 54.
Table 3 - 1 Setup menu key functions
Legend Description
Press and hold while turning the LCR meter ON
( ) to access the Setup menu.
Press and hold for more than 1 second to exit
this mode.
Press or to step through the menu items.
Press or at each menu item to change the
preset settings. The menu item (in the secondary
display) will flash to indicate that you can now
change the menu item values.
Press or again to switch between two
values, to cycle through multiple values from a list,
or to decrease or increase a numerical value.
While the menu item is flashing, press to save
your changes.
While the menu item is flashing, press to
discard your changes.
To Next Page
Loading...
Need help?
General
