Agilent Technologies U1731C

3Setup Options
Setup Menu Items
58 U1731C/U1732C/U1733C User’s Guide
Changing the power-on test frequency
Use this Setup item to change the LCR meter’s initial test
frequency. You can set the LCR meter to start up using a
test frequency from 100 Hz to 100 kHz.
The LCR meter will start up using the selected test
frequency for subsequent power cycles.
Figure 3-2 Changing the power-on test frequency
Pr e s s
Pr e s s
Pr e s s
Pr e s s