Aiphone IX-MV7-HW - Page 186

186
Settings and Adjustments
Configuring the device on a PC
4
Door Release Activated An email message will be sent when the door
release button or ten-key pad is used to perform
a door release operation.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Call Failed An email message will be sent when a call fails. • Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Error An email message will be sent when a
communication error occurs and is restored.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Station Restarted An email message will be sent when the station
is restarted.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
SD Card Error An email message will be sent if an access error
for the micro SD card is detected. If an error is
detected consecutively, a message will not be
sent for the second or later errors.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Recording Memory Full An email message will be sent when a microSD
card experiences any of the following. If multiple
errors are detected in a row, the email message
will not be sent from the second time onward.
• If
“Prevent Overwrite (→page 189)” is set to
"Prohibit"
– If the number of video and audio files saved
exceeds 950
– When only 5% or less of the total storage
space of the microSD card is free
• If
“Prevent Overwrite (→page 189)” is set to
"Do not prohibit"
– If the number of video and audio files saved
reaches 999
– When 0% of the total storage space of the
microSD card is free
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Line Supervision (Passed) An email message will be sent when the line
monitor result is normal.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Line Supervision (Failed) An email message will be sent when the line
monitor result is abnormal.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Device Check (Passed) An email message will be sent when the failure
monitor result is normal.
• Checked: Send
• Unchecked: Do not
send
Unchecked: Do not
send
Device Check (Failed) An email message will be sent when the failure
monitor result is abnormal.
• Checked: Send
• Unchecked: Do not
send
Unchecked:
Disable
Subject Configure the subject text of the email message
for each trigger. This will be used for all
recipient addresses.
1 - 64 alphanumeric
characters
-
Important
• "UTF-8" is used to encode "Subject." Characters may display incorrectly depending on the email client. To avoid this, set the
encoding method to "UTF-8."
Entry Description Settings Default values