207
Settings and Adjustments
Configuring the device on a PC
4
■ Daily Schedule
Configure the transfer destination and time for schedule transfer, in units of one day. A schedule one year from the
set day can be configured. Up to 12 schedules can be set for each day.
How to configure Daily Schedule
1. Select the day for which to set a schedule from "Calendar."
2. Configure "Transfer to Station Number," "Re-Transfer Destination," "Start Time," and "End Time,"
and then click [Add].
3. When done, click [Update].
Entry Description Settings Default values
Transfer Destination Configure the station number of the transfer
destination station. Up to 10 transfer destination
stations can be set. However, if the calling
station is IX-MV, IX-DA(-*), or IX-BA, calls will
only be transferred to the first station that was
entered. IXW-MA cannot be configured as a
transfer destination.
3-32 digits
To configure multiple
stations, enter them
separated with a comma
(,).
Example: 101,102,103,...
-
Re-Transfer Destination Configure the station number of the transfer
destination station when transferring a
transferred call. Only a single station can be set
as the transfer destination. However, if the
calling station is IX-MV, IX-DA(-*), or IX-BA, the
call will not be re-transfered, but will be received
by this station. IXW-MA cannot be configured as
a transfer destination.
3-32 digits -
Start Time Configure the time to begin schedule transfer. 00:00 - 23:59 -
End Time Configure the time to stop schedule transfer. If
this is set earlier than
“Start Time
(→page 207)”, the end time will be for the
following day.
00:00 - 23:59 -
Calendar
Set schedule list
To Next Page
Loading...
Need help?
General
