How to improve AIRTRONICS MT-S transmitting range?
If you're experiencing inadequate transmitting range with your AIRTRONICS Remote Control, consider the following: * Low transmitter battery voltage. Replace or recharge the transmitter batteries. * Low receiver battery voltage. Replace or recharge the receiver batteries. * Incorrect receiver mounting. Mount the receiver exactly as recommended.
Why AIRTRONICS MT-S servo movement is slow?
Slow servo movement in your AIRTRONICS Remote Control can be attributed to: * Low receiver battery voltage. Replace or recharge the receiver batteries. * Control linkages binding. Adjust control linkages to operate smoothly. * Using a negative Servo Speed value. Increase Servo Speed value.
Why AIRTRONICS MT-S audible alarm beeps continuously?
The continuous beeping from your AIRTRONICS Remote Control audible alarm could be due to: * Low transmitter battery voltage. Replace or recharge the transmitter batteries. * The transmitter being left ON for 10 minutes or more without control input. Move the Steering Wheel or Throttle Trigger, or press any key to clear the alarm and continue operation. * Transmitter battery voltage being too high. Use a transmitter battery whose voltage is 9.6 volts or less when fully charged.
Why AIRTRONICS MT-S transmitter does not turn on?
The AIRTRONICS Remote Control transmitter might not turn on due to several reasons: * The batteries might be installed incorrectly. Reinstall them, making sure to observe the correct polarity. * The battery tray might not be plugged in. Ensure that the battery tray is properly plugged in. * The transmitter batteries might be dead. Replace or recharge the transmitter batteries.
Precautions for using the 2.4GHz band to avoid interference and ensure reliable operation.
Guidelines for safe and optimal operation of the transmitter, including antenna handling and power.
Important considerations for receiver installation and usage to ensure performance and prevent damage.
Overview of menus for D/R, Speed, Curve, F/S, Base, and Func adjustments.
Overview of AUX menus for Step, Point, 4WS, MOA, Aux Mix, and Code auxiliary functions.
Overview of Model menus for selecting, naming, copying, and clearing models.
Overview of Timer menus for Lap, Interval, Countdown timers, and viewing lap times.
Overview of Telemetry menus for viewing data logs, alerts, and system settings.
Overview of System menus for binding, key assignments, buzzer, battery, LCD, and VR adjust.
Helps diagnose and solve common problems encountered with the radio control system.
General| Brand | AIRTRONICS |
|---|---|
| Model | MT-S |
| Category | Remote Control |
| Language | English |
To Next Page
