Chapter 10: Disk Operation
Page 166
If you don't want to keep the loaded sound, press DSCARD [F4] to discard it.
Press KEEP [F5] to load the sound to the selected drum pad.
4-2. Loading .SEQ (sequence) or .MID (standard MIDI) Files
Press DO IT [F6] to load the sequence file. The following window appears when loading
is completed.
........................
......................................................................................................
........................................................................................................
............................
DSCARD KEEPPLAY
Load a SequemceLoad a Sequemce
File:TEST01 .MID
Load into:Load into:01-(Unused)
The file name will appear in the File: field.
Press PLAY [F3] to listen to the sequence.
Select the sequence number that you want to assign the sequence data to in the Load
into: field.
Press KEEP [F5] to assign the loaded file to the sequence number.
Note: The MPC2000XL can load sequence files of up 50,000 note events (approxi-
mate file size of 250kb) per sequence. If you try to load a file larger than this,
only the first 50,000 note events will be loaded.
If you do not want to keep the file, press DSCARD [F4] to discard it.
4-3. Loading .PGM (program) Files
When a program file is loaded, the selected program and the sounds assigned to that
program will be loaded.
Press DO IT [F6] to display the following window.
The Replace same sound in memory: field selects whether to replace the
same sound in the MPC2000XL's memory with the sound on the disk (if the sound as-
signed to the loaded program already exists). If this is set to YES, all of the data on the
disk with the same name will replace the sounds in the MPC2000XL's memory. If this is
set to NO, sounds with the same name will not be loaded and the sounds in the
MPC2000XL's memory will be used.
Press CLEAR [F3] to erase all the program and sound data within the memory and load
the new program.
Press LOAD [F5] to add to existing programs and sounds.
........................
......................................................................................................
........................................................................................................
............................
CANCEL LOADCLEAR
Load a ProgramLoad a Program
Replace same sound in memoryReplace same sound in memory
:NO(FASTER)
[CLEAR] erases existing P & S[CLEAR] erases existing P & S
[LOAD] adds to existing P & S adds to existing P & S
To Next Page
Loading...
Need help?
General
