46 Chapter 5: STEP EDIT mode
MPC500 Operator's Manual rev 1.0
Delt (Delete Event)
Events can be deleted directly from the event list by doing the following:
1. Select an event that you want to delete.
2. Select "Delt" on 'Parameter' field.
When you select "Delt" at 'Parameter' field, the [DO IT] button will start to blink.
3. Press the [DO IT] button to delete the selected event.
You can select the scroll icon with the cursor and use the [DATA] wheel to select other events that are in same location with the event you
select in step 1.
Tip: When Step is selected at the 'Parameter' field, you can delete the selected event instantly by holding SHIFT button and pressing ERASE
button.
Move (Move Event)
This function allows you to move individual events to another location. To move an event, do the following:
1. Select an event that you would like to move.
2. Select "Move" on 'Parameter' field.
3. Set the 'Now' field to time where you want to move the event.
When you change the value of 'Now' field, the [CANCEL] and [DO IT] buttons will start to blink.
4. Pressing the [DO IT] button will move the selected event to new location. Pressing CANCEL will return the value of
the 'Now' field to its original event time.
When the [DO IT] button is pressed, the event will be deleted from its old location, and moved to the new time selected.
You can select the scroll icon with the cursor and use the [DATA] wheel to select other events that are in same location with the event you
select in step 1. To exit the Move event function, press the [CANCEL] button, or scroll the Parameter to a different selection.
Inst (Insert Event)
Events can be inserted into the current Now location by selecting INST in the 'Parameter' field. The following is a list of events that can be
chosen in the 'Event type' field.
To Next Page
Loading...
Need help?
General
