Alcatel-Lucent 7210 SAS-T User Manual

Hardware Description
Page 30 7210 SAS-T Installation Guide
System Buttons and Switches
See Table 11 for descriptions of front panel buttons and switches.
Table 11: Front Panel Buttons and Switches
Button/Switch Condition Status
Power Module Switch 0 Standby mode if switch is connected to a power source.
1 AC or DC power is applied to the switch.
ACO (Alarm Cut Off) Not pushed Normal operating mode.
Reset (Recessed) Not pushed Normal operating mode. Push to reset hardware.

Alcatel-Lucent 7210 SAS-T Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-T
Category	Switch
Language	English