EasyManua.ls Logo

Alcatel-Lucent 7210 SAS-T - Booting a 7210 SAS-T from the External Compact Flash

Alcatel-Lucent 7210 SAS-T
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Initializing the System and Downloading Software
Page 54 7210 SAS-T Installation Guide
Booting a 7210 SAS-T from the External Compact Flash
User can boot the 7210 SAS-T using the external compact flash device slot on the front panel using
one of the recommended compact flash devices. User needs to first format the compact flash, using
a Windows PC and compact flash read/write device, as a DOS file system (as a FAT32 or FAT16
file system) and then copy over the Timos images boot.tim and both.tim into the compact flash
under the root directory (i.e. cf2:/boot.tim and cf2:/both.tim). Now insert the compact flash into the
external compact flash device slot on the front-panel of the 7210 SAS-T device and follow the
procedure given below:
Alcatel SAS-T 7210 Boot ROM. Copyright 2000-2013 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Build: X-6.0.S73 on Sat Aug 3 00:41:34 IST 2013 by builder
Version: 0xC
DRAM test first stage
Boot rom version is v12
CPLD Version: 2.8
DRAM test second stage
Board Serial Number is 'NS1310C2052'
?Searching for boot.tim on local drives:
Attempting to load file cf1:/boot.tim
Cannot open "cf1:/boot.tim".
Attempting to load from alternate boot device
Looking for boot.tim in cf2:...
boot.tim found in cf2:
Attempting to load file cf2:/boot.tim
Version L-6.0.S73, Sat Aug 3 00:41:40 IST 2013 by builder in /home/builder/6.0S/panos/main
text:(6480576-->23981760) + data:(1143744-->4691824)
Starting at 0xe000000...
PCIe: Port 0 link active, 1 lanes
Total Memory: 1GB Chassis Type: sas Card Type: badami_7210
TiMOS-L-6.0.S73 boot/hops ALCATEL SAS-T 12F10T 4XFP ETR 7210 Copyright (c) 2000-2013 Alca-
tel-Lucent.
All rights reserved. All use subject to applicable license agreements.
Built on Sat Aug 3 00:41:40 IST 2013 by builder in /home/builder/6.0S/pan
TiMOS BOOT LOADER
CPLD Version: 2.8
Extended checks enabled with overhead of 36B
Bss fence checking disabled
Fair scheduler is now enabled
Time from clock is SUN APR 16 10:04:21 2000 UTC
Switching serial output to sync mode... done
Looking for cf2:/bof.cfg ... OK, reading

Table of Contents

Related product manuals