Alcatel-Lucent 7210 SAS-T User Manual

Establishing Router Connections
Page 72 7210 SAS-T Installation Guide
Running Telnet
Once the IP parameters are configured, you can access the CLI command line with a Telnet
connection. To establish a Telnet connection, run a Telnet program and issue the Telnet command,
followed by the IP address:
The following displays an example of a Telnet login:
C:\>telnet 10.10.10.25
Login: admin
Password: ########
ALA-1#

Alcatel-Lucent 7210 SAS-T Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-T
Category	Switch
Language	English