Configuring the 7210 SAS-T
7210 SAS-T Installation Guide Page 67
console-speed 115200
Do you want to overwrite cf1:/bof.cfg with the new settings? (yes/no): yes
Type yes and press Enter.
The 7210 SAS-T should boot now.
Successfully saved the new settings in cf1:/bof.cfg
Configuring Network with eth-mgmt Port Setting.....
No existing config file URL
Primary image location: ftp://*:*@10.10.170.22/./images/both.tim
Loading image ftp://*:*@10.10.170.22/./images/stu-hw/both.tim
Version B-2.0.B1-57, Tue Jul 13 23:24:58 IST 2010 by builder in /builder/2.0B1/panos/
main
text:(24285906-->114984824) + data:(2989128-->18305224)
Executing TiMOS image at 0x100000
.........
After the 7210 SAS-T boots up, you should see the following prompt:
All rights reserved. All use subject to applicable license agreements.
Built on Tue Jul 13 23:24:58 IST 2010 by builder in /builder/2.0B1/panos/main
Login:
The default username and password are admin. Use it to log into the device.
Note: The status LED will be Green when the device has successfully completed the boot process
and is running normally. It is highly recommended that you change the default admin password to
prevent unauthorized access to the node.
To Next Page
Loading...
Need help?
General
