Alcatel-Lucent AOS-W 6.5.3.x - Page 1077

XML API server 10.11.12.13
RFC 3576 server N/A
User derivation rules N/A
Wired to Wireless Roaming Enabled
SIP authentication role N/A
(host) (config) #wlan virtual-ap wireless-vap
(host) (Virtual AP profile "wireless-vap") #aaa-profile wirelessusers
(host) (AAA Profile "wirelessusers") #exit
(host) (config) #show wlan virtual-ap wireless-vap
Virtual AP profile "wireless-vap"
---------------------------------
Parameter Value
--------- -----
Virtual AP enable Enabled
Allowed band all
AAA Profile wirelessusers
802.11K Profile default
SSID Profile default
VLAN N/A
Forward mode tunnel
Deny time range N/A
Mobile IP Enabled
HA Discovery on-association Disabled
DoS Prevention Disabled
Station Blacklisting Enabled
Blacklist Time 3600 sec
Dynamic Multicast Optimization (DMO) Disabled
Dynamic Multicast Optimization (DMO) Threshold 6
Authentication Failure Blacklist Time 3600 sec
Multi Association Disabled
Strict Compliance Disabled
VLAN Mobility Disabled
Remote-AP Operation standard
Drop Broadcast and Unknown Multicast Disabled
Convert Broadcast ARP requests to unicast Enabled
Band Steering Disabled
WMM Traffic Management Profile N/A
For wired users, associate the XML API server to the AAA profile of the appropriate wired profile:
(host) (config) #aaa profile wiredusers
(host) (AAA Profile "wiredusers") #xml-api-server 10.11.12.13
(host) (AAA Profile "wiredusers") #exit
(host) (config) #aaa authentication wired
(host) (Wired Authentication Profile) #profile wiredusers
(host) (Wired Authentication Profile) #exit
(host) (config) #show aaa authentication wired
Wired Authentication Profile
----------------------------
Parameter Value
--------- -----
AAA Profile wiredusers
For unknown wired users, associate the XML API server to the default-xml-api AAA profile:
The default-xml-api AAA profile is used only to add or authenticate new users.
AOS-W 6.5.3.x | User Guide External User Management | 1077