Integrated Deployment Model
In the integrated deployment model, AirGroup features are integrated with the WLAN switch that terminates
all APs and provides WLAN services. This deployment model also supports optional integration with CPPM.
When you implement AirGroup in an integrated deployment, upgrade the switch to AOS-W 6.4 or later, and
trunk all VLANs with wired devices (such as printers) to the AirGroup switch.
If your deployment requires ClearPass Policy Manager integration, complete the procedures described in ClearPass
Policy Manager User Guide and ClearPass Guest Deployment Guide before performing the steps described in this
section.
Master-Local Switch Synchronization
You can configure AirGroup from the master switch to ease the deployment. The master switch then
synchronizes the AirGroup configuration elements on all associated local switches it manages. AirGroup
configurations can belong to any of the following categories:
Master — These commands must be configured from a master switch. The master switch pushes the
AirGroup configurations to all the applicable local switches.
n AirGroup custom service definition. For more information, see Integrated Deployment Model on page
1010.
n AirGroup disallow user-role (service filtering) definition. For more information, see Configuring the disallow-
role for an AirGroup Service on page 1014.
n AirGroup disallow VLAN (service filtering) definition. For more information, see Restricting AirGroup Servers
on a VLAN based on an AirGroup Service on page 1015.
n AirGroup CPPM enforce registration. For more information, see Configuring CPPM to Enforce Registration
on page 1026.
n AirGroup switch-CPPM Interface definition. For more information, see Configuring the AirGroup-CPPM
Interface on page 1021.
n AirGroup multi-switch domain definition. For more information, see Configuring an AirGroup Domain on
page 1016.
n AirGroup CPPM query interval definition. For more information, see Configuring the CPPM Query Interval
on page 1021.
Local — There are a few configuration limitations on the local switch. The local switch can only include the
existing AirGroup domains in the AirGroup active-domain list, applicable for this switch. The local switch cannot
define or edit an AirGroup domain.
These configuration commands are applicable to both master and local switches. The master switch does not
push the following AirGroup configuration commands to all applicable local switches.
n AirGroup enable/disable parameter. For more information, see Enabling or Disabling AirGroup Global
Setting on page 1011.
n AirGroup service enable/disable parameter. For more information, see Enabling or Disabling an AirGroup
Service on page 1015.
n AirGroup allowall service status. For more information, see Enabling the allowall Service on page 1015.
n AirGroup disallow VLAN (global) definition. For more information, see Restricting AirGroup Servers for a
VLAN on page 1014.
n AirGroup multi-switch active-domain definition. For more information, see Configuring an AirGroup active-
domain on page 1017.
AOS-W 6.5.3.x | User Guide AirGroup | 1010
To Next Page
Loading...