Alcatel-Lucent AOS-W 6.5.3.x - Configuring H2 QP Connection Capability Profiles

1. Navigate to Configuration>Advanced Services>All Profiles.
2. In the profiles list, expand the Wireless LAN section.
3. Select ANQP 3GPP Cellular Network.
4. Select an existing profile from the list of profiles on the profile details pane or create a new profile by
entering a profile name into the entry blank, then clicking Add.
5. Configure the following parameters as desired, then click Apply to save your settings.
Parameter Description
3GPP PLMN1
The Public Land Mobile Networks (PLMN) value of the highest-priority network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
3GPP PLMN2
The Public Land Mobile Networks (PLMN) value of the second-highest priority
network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
3GPP PLMN3
The Public Land Mobile Networks (PLMN) value of the third-highest priority network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
3GPP PLMN4
The Public Land Mobile Networks (PLMN) value of the fourth-highest priority network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
3GPP PLMN5
The Public Land Mobile Networks (PLMN) value of the fifth-highest priority network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
3GPP PLMN6
The Public Land Mobile Networks (PLMN) value of the sixth-highest priority network.
The PLMN is comprised of a 12-bit Mobile Country Code (MCC) and the 12-bit Mobile
Network Code (MNC).
Table 215: ANQP 3GPP Cellular Network Profile Parameters
In the CLI
To configure an ANQP 3GPP network profile from the switch CLI, access the CLI in config mode and issue the
following commands:
wlan hotspot anqp-3gpp-nwk-profile <profile-name>
3gpp_plmn1 <3GPP PLMN1 data>
3gpp_plmn2 <3GPP PLMN2 data>
3gpp_plmn3 <3GPP PLMN3 data>
3gpp_plmn4 <3GPP PLMN4 data>
3gpp_plmn5 <3GPP PLMN5 data>
3gpp_plmn6 <3GPP PLMN6 data>
clone <profile-name>
enable
no ...
Configuring H2QP Connection Capability Profiles
Use this profile to specify hotspot protocol and port capabilities. This information is sent in a Access Network
Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response.
AOS-W 6.5.3.x | User Guide 802.11u Hotspots | 910