EasyManua.ls Logo

Alcatel-Lucent AOS-W 6.5.3.x - AP Discovery Logic

Alcatel-Lucent AOS-W 6.5.3.x
1160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
510| Access Points AOS-W 6.5.3.x| User Guide
Profile Settings
802.11a/802.11g Radio Profile n Channel
n Enable Channel Switch Announcement (CSA)
n CSA Count
n High throughput enable (radio)
n Very high throughput enable (radio)
n TurboQAM enable
n Maximum distance (outdoor mesh setting)
n Transmit EIRP
n Advertise 802.11h Capabilities
n Beacon Period/Beacon Regulate
n Advertise 802.11d Capabilities
Virtual AP Profile n Virtual AP enable
n Forward Mode
n Remote-AP operation
SSID Profile n ESSID
n Encryption
n Enable Management Frame Protection
n Require Management Frame Protection
n Multiple Tx Replay Counters
n Strict Spectralink Voice Protocol (SVP)
n Wireless Multimedia (WMM) settings
l Wireless Multimedia (WMM)
l Wireless Multimedia U-APSD (WMM-UAPSD) Powersave
l WMM TSPEC Min Inactivity Interval
l Override DSCP mappings for WMM clients
l DSCP mapping for WMM voice AC
l DSCP mapping for WMM video AC
l DSCP mapping for WMM best-effort AC
l DSCP mapping for WMM background AC
High-throughput SSID Profile n High throughput enable (SSID)
n 40 MHz channel usage
n Very High throughput enable (SSID)
n 80 MHz channel usage (VHT)
802.11r Profile n Advertise 802.11r Capability
n 802.11r Mobility Domain ID
n 802.11r R1 Key Duration
n key-assignment (CLI only)
Hotspot 2.0 Profile n Advertise Hotspot 2.0 Capability
n RADIUS Chargeable User Identity (RFC4372)
n RADIUS Location Data (RFC5580)
Table 118: Profile Settings in AOS-W 6.5.x
APDiscovery Logic
In the AOS-W 6.5.1.x and earlier release trains, APs are predefined as either switch-based campus APs or
switch-less Instant APs. Each campus AP is shipped with the AOS-W manufacturing image and must connect to
a switch in order to receive configurations. Campus APs can only run the AOS-W image and cannot be
converted into Instant APs. Each Instant AP is shipped with the Instant manufacturing image and must join an
IAP cluster in order to receive configurations from a virtual switch. Instant APs run the Instant image and can
also be converted into campus APs.

Table of Contents