Alcatel-Lucent AOS-W 6.5.3.x - Creating and Editing Mesh High-Throughput SSID Profiles

618| Secure Enterprise Mesh AOS-W 6.5.3.x| User Guide
3. Click Delete by the name of the profile you want to delete.
The following command deletes a radio profile via the command-line interface.
(host)(config)no ap mesh-radio-profile <profile-name>
Creating and Editing Mesh High-Throughput SSID Profiles
The mesh high-throughput SSID profile defines settings unique to 802.11n and 802.11ac-capable, high-
throughput APs. If none of the APs in your mesh deployment are 802.11n or 802.11ac-capable APs, you do
not need to configure a high-throughput SSID profile. If you modify a currently provisioned and running high-
throughput SSID profile, your changes take effect immediately. You do not need to reboot the switch or the
AP.
Managing Mesh High-Throughput SSID Profiles in the WebUI
Use the following procedures to manage your high-throughput SSID profiles using the WebUI.
Creating a Profile
To create a high-throughput SSID profile:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
n If you selected AP Group, click the AP group for which you want to create the new high-throughput SSID
profile.
n If you selected AP Specific, click the AP for which you want to create the new high-throughput SSID
profile.
2. In the Profiles list, expand the Mesh menu, then select Mesh High-throughput SSID profile.
3. In the Profile Details window pane, click the Mesh High-throughput SSID profile drop-down list and
select NEW.
4. Enter a name for the new profile.
5. Configure the mesh high-throughput SSID parameters described in Table 138. The Mesh High-Throughput
SSID Profile configuration settings are divided into two tabs, Basic and Advanced. The Basic tab displays
only those configuration settings that often need to be adjusted to suit a specific network. The Advanced
tab shows all configuration settings, including settings that do not need frequent adjustment or should be
kept at their default values. If you change a setting on one tab then click and display the other tab without
saving your configuration, that setting reverts to its previous value.
6. Click Apply. The profile name appears in the Mesh High-throughput SSID Profile list with your configured
settings.
Parameter Description
Basic Mesh High-Throughput SSID Profile Settings
40 MHz channel usage Enable or disable the use of 40 MHz channels.
Default: enabled
80 MHz channel usage
Enable or disable the use of 80 MHz channels.
Default: enabled
Table 138: Mesh High-Throughput SSID Profile Configuration Parameters