345| Captive Portal Authentication AOS-W 6.5.3.x| User Guide
When this feature is disabled, the switch sends 200 OK status code message to the now-browser based apps so
that the apps stop sending repeated requests to the switch. This reduces the load of the httpd process on the
switch. This feature is enabled by default.
You can enable this feature from the switch CLI. On enabling this feature, non-browser apps continue to
request Captive Portal login page from the switch. This increases the load of the httpd process of the switch.
(host) (config) #web-server profile
(host) (Web Server Configuration) #bypass-cp-landing-page
The landing page contains the meta-refresh tag to reload the page using real browser applications.
Netdestination for AAAA Records
The Captive Portal whitelist supports IPv6 addresses for netdestination. Add an IPv6 netdestination with the
domain name that is to be whitelisted and specify this destination as whitelist in Captive Portal profile. This
adds the required ACL policies to permit IPv6 traffic to the domain.
In the CLI
(host) (config) #netdestination6 <string>
name <host_name>
To Next Page
Loading...