Alcatel-Lucent AOS-W 6.5.3.x - Configuring Remote Mesh Portals (Rmps)

630| Secure Enterprise Mesh AOS-W 6.5.3.x| User Guide
(host) #show ap mesh topology
Mesh Cluster Name: sw-ad-GB32
-----------------------------
Name Mesh Role Parent Path Cost Node Cost Link Cost Hop Count RSSI Rate Tx/Rx
---- --------- ------ --------- --------- --------- --------- ---- ---------- Last
Update Uplink Age #Children
---------- ---------- ---------
ad-ap Point (N) mp3 2 0 0 1 61 300/270 6m:12s
3h:8m:7s 0
msc-1 Point mp3 2 0 0 1 64 54/54 6m:36s
2h:48m:12s 0
Total APs :2
(R): Recovery AP. (N): 11N Enabled. For Portals 'Uplink Age' equals uptime.
Issue the command show ap mesh neighbors ap-name <name> to verify visibility of other mesh nodes is
as expected:(host) #show ap mesh neighbors ap-name portal
Neighbor list
-------------
MAC Portal Channel Age Hops Cost Relation Flags RSSI
Rate Tx/Rx
--- ------ ------- --- ---- ---- -------- ----- ---- --
--------
00:0b:86:e8:09:d1 00:1a:1e:88:01:f0 157 0 1 11.00 C 3h:15m:42s - 65
54/54
00:1a:1e:88:02:91 00:1a:1e:88:01:f0 157 0 1 4.00 C 3h:35m:30s HL 59
300/300
00:0b:86:9b:27:78 Yes 157 0 0 12.00 N 3h:22m:46s - 26 -
00:0b:86:e8:09:d0 00:1a:1e:88:01:f0 157 0 1 11.00 N 3h:15m:36s - 65 -
00:1a:1e:88:02:90 00:1a:1e:88:01:f0 157+ 0 1 2.00 N 3h:35m:6s HL 59 -
A-Req A-Resp A-Fail HT-Details Cluster ID
----- ------ ------ ---------- ----------
1 1 0 Unsupported sw-ad-GB32
1 1 0 HT-40MHzsgi-2ss sw-ad-GB322
0 0 0 Unsupported mc1
0 0 0 Unsupported sw-ad-GB32
0 0 0 HT-40MHzsgi-2ss sw-ad-GB32
Total count: 5, Children: 2
Configuring Remote Mesh Portals (RMPs)
The following steps describe the procedure to configure a Remote Mesh portal using the WebUIand CLI
interfaces.
Creating a Remote Mesh Portal In the WebUI
A remote mesh portal must be provisioned as both a remote access point and a mesh portal. For instructions
on provisioning the remote mesh portal as a remote access point, see Configuring the Secure Remote Access
Point Service on page 697.