1103| DHCP with Vendor-Specific Options AOS-W 6.5.3.x| User Guide
Field Information
Name Alcatel-Lucent Access Point
Data Type String
Code 60
Description Alcatel-Lucent AP vendor class
identifier
Table 273: Configuring Option 60 using the Windows DHCP
Server
5. Click OK to save this information.
6. In the Predefined Options and Values dialog box, make sure 060 Alcatel-Lucent Access Point is selected
from the Option Name drop-down list.
7. In the Value field, enter the following information:
String : Alcatel-LucentAP
8. Click OK to save this information.
9. Under the server, select the scope you want to configure and expand it. Select Scope Options, then select
Configure Options.
10.In the Scope Options dialog box, scroll down and select 060 Alcatel-Lucent Access Point. Confirm the
value is set to Alcatel-LucentAP and click OK.
11.Confirm that the option 060 Alcatel-Lucent Access Point is listed in the right pane.
Configuring Option 43
Configuring Option 43 returns the IP address of the Alcatel-Lucent master switch to an Alcatel-Lucent DHCP
client. This information allows Alcatel-Lucent APs to auto-discover the master switch and obtain their
configuration.
Configuring Option 43 using the Windows DHCP Server:
1. On the DHCP server, open the DHCP server administration tool by clicking Start > Administration Tools
> DHCP.
2. Find your server and right-click on the scope to be configured under the server name. Click on the Scope
Options entry and select Configure Options.
3. In the Scope Options dialog box (Figure 235), scroll down and select 043 Vendor Specific Info.
To Next Page
Loading...