ARM
Adaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are
allowed ready access. It enables full utilization of the available spectrum to support maximum number of
users by intelligently choosing the best RF channel and transmit power for APs in their current RF
environment.
ARP
Address Resolution Protocol. ARP is used for mapping IP network address to the hardware MAC address of a
device.
Aruba Activate
Aruba Activate is a cloud-based service that helps provision your Aruba devices and maintain your inventory.
Activate automates the provisioning process, allowing a single IT technician to easily and rapidly deploy
devices throughout a distributed enterprise network.
ASCII
American Standard Code for Information Interchange. An ASCII code is a numerical representation of a
character or an action.
band
Band refers to a specified range of frequencies of electromagnetic radiation.
BGP
Border Gateway Protocol. BGP is a routing protocol for exchanging data and information between different
host gateways or autonomous systems on the Internet.
BLE
Bluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long
durations with low power consumption.
BMC
Beacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices
are used for location tracking and proximity detection.
BPDU
Bridge Protocol Data Unit. A BPDU is a data message transmitted across a local area network to detect loops
in network topologies.
B-RAS
Broadband Remote Access Server. A B-RAS is a server that facilitates and converges traffic from multiple
Internet traffic resources such as cable, DSL, Ethernet, or Broadband wireless.
BRE
Basic Regular Expression. The BRE syntax standards designed by the IEEE provides extension to the
traditional Simple Regular Expressions syntax and allows consistency between utility programs such as grep,
sed, and awk.
AOS-W 6.5.3.x | User Guide Glossary of Terms | 1122
To Next Page
Loading...