Alcatel-Lucent AOS-W 6.5.3.x - Page 188

VSA
Type Value
Description
Vendor
Name
Vendor
ID
Hotspot2-Deau-
thentication-
Request
String 4
This attribute contains the following message
fields:
n Code: Specify the reason the mobile device is
being de-authenticated
0 = User’s subscription does not allow or no
longer allows access at this BSS
1 = User’s subscription does not allow or no
longer allows access at this ESS
n Re-auth Delay: Define the delay time (in
seconds) that a mobile device waits before
attempting re-association to the same BSS,
ESS (as indicated in the Code variable). The
supported range is 0- 65535. A value of 0
indicates the Re-auth Delay may be decided by
the mobile device.
n UI message field: The URL of a server that
explains why the mobile device was not
authorized. This URLmust be defined as a
UTF-8 encoded string.
Wi-Fi-
Alliance
40808
Hotspot2-Ses-
sion-Info-URL
String 5
Configure this attribute to send a BSS Transition
Management Request frame before the mobile
device’s session is terminated, warning the user
their session is about to end. The URL provides a
link to a webpage that provides the user with
information on how to extend their session.
This attribute contains the following message
fields:
n Session Warning Time (SWT): The Session
Warning Time (SWT) is the number of minutes
before the end of a session that the AP warns
the mobile device about the upcoming session
end. If this value is set to 255, the AP selects
the session warning time value.
n Session Information URL: This URL is sent to
a mobile device before the end of the session.
The URL can link to a website that describes
how users can extend their sessions.
Wi-Fi-
Alliance
40808
Customizing the RADIUS Attributes
Starting from AOS-W 6.5.1, the users can now configure RADIUS modifier profile to customize the attributes
that are included, excluded and modified in the RADIUS request before it is sent to the authentication server.
The RADIUS modifier profile can be configured and applied to either Access- Request or Accounting-Request or
both on a RADIUS authentication or accounting server.
This profile can contain up to 64 RADIUS attributes with static values that are used either to add or update in
the request and another 64 RADIUS attributes to be excluded from the Requests.
Two new parameters have been added in the RADIUS modifier profile :
n auth-modifier: When assigned, it references to a RADIUS modifier profile which is applied to all Access-
Requests sending to this RADIUS authentication server.
n acct-modifier: When assigned, it references to a RADIUS modifier profile which is applied to all Accounting-
Requests sending to this RADIUS accounting server.
To create a RADIUS modifier profile to customize the attributes that are included, excluded and modified in the
RADIUS request before it is sent to the authentication or accounting server:
AOS-W 6.5.3.x | User Guide Authentication Servers | 188