7. Select the First Dynamic Field from the drop-down list.
8. Select the Optional Second Dynamic Field from the drop-down list.
9. Select the Delimiter Between Fields from the drop-down list.
10.Click Add to add the radius modifier.
11.. Click Save as and enter the name of the Radius Modifier profile.
12.. Click Apply.
In the CLI
To configure a RADIUS modifier profile with single-item dynamic data
(host)(config) #aaa radius modifier dynamic-mod
(host) (Radius Modifier Profile "dynamic-mod") #?
clone Copy data from another Radius Modifier Profile
exclude Attribute to be excluded in RADIUS request
include Attribute/Value to be included in RADIUS request
no Delete Command
(host) (Radius Modifier Profile "dynamic-mod") #include ?
<name> RADIUS Attribute Name
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id ?
dynamic First dynamic field
static Static Data
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic ?
ap-group1 Use AP group as first dynamic field
ap-macaddr1 Use AP mac address as first dynamic field
ap-name1 Use AP name as first dynamic field
essid1 Use essid as first dynamic field
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic ap-name1
To configure a RADIUS modifier profile with two-item dynamic data
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic ?
ap-group1 Use AP group as first dynamic field
ap-macaddr1 Use AP mac address as first dynamic field
ap-name1 Use AP name as first dynamic field
essid1 Use essid as first dynamic field
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic essid1 ?
with Optional second dynamic field
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic essid1 with
?
ap-group2 Use AP group as second dynamic field
ap-macaddr2 Use AP mac address as second dynamic field
ap-name2 Use AP name as second dynamic field
essid2 Use essid as second dynamic field
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic essid1 with
ap-macaddr2 ?
delimiter Delimiter between fields
(host) (Radius Modifier Profile "dynamic-mod") #include Aruba-Location-Id dynamic essid1 with
ap-macaddr2 delimiter ?
at Use '@' as delimiter between fields
colon Use ':' as delimiter between fields
dash Use '-' as delimiter between fields
dollar Use '$' as delimiter between fields
AOS-W 6.5.3.x | User Guide Authentication Servers | 190