Parameter Description
MAC Address MAC address of the switch.
Description A brief description of the switch
Time Zone A text string indicating the switch's time zone.
NOTE: This string must contain three or more characters of a supported time zone in any of
the formats described in Table 63, for example, HongKong or UTC+08 or CCT.
DST Specify ON or OFF to indicate if the switch's time zone is currently using daylight savings
time.
Pool Name of an IP address pool. The template supports up to four different address pools, so
different address pools can be used for APs, employees, or guest users.
Domain Name of the branch switch domain.
DNS IP address of the DNS server.
Vlan ID of the branch switch VLAN.
Vlan IP IP address of the branch switch
Mask Netmask of the branch switch network.
Exclude List A comma-separated list of IP addresses or IP address ranges that should not be assigned to
clients associated to that branch switch. For example, 15.15.15.11-
15.15.15.20,15.15.15.25,15.15.15.31-15.15.15.40.
IP Helper DHCP server relay agent IP address.
Table 62: Branch Config Group Template Setting
The new branch config group appears in the Branch Config Group List table. This table displays the branch
config group name, validated/not validated status, and reboot status for each branch config group.
n Status: A status of Validated indicates that the branch config group has a complete configuration that can
be applied to branch switches. (For example, a branch config group might have a status of Not Validated if
the branch config group does not have a IP address defined for the switch or a switch VLANinterface.)
n Reboot Required: This field indicates that the branch config group includes a configuration change that
requires a reboot on the branch switches using that config group.
The table below describes the time zone formats supported by the export-RemoteNode.csv template. Each
line in the table describes three or more time zone formats for a single location, though only one is required for
the template. For example, specify Edinburgh or UTC+00 or UTC or BST.
AOS-W 6.5.3.x | User Guide BranchSwitch Config for Cloud Services Switches | 235
To Next Page
Loading...