Feature Description
Secondary Master The secondary master switch feature in AOS-W 6.5.0.0 provides seamless
connectivity by allowing an access point to terminate on a secondary
master switch in the event of the master switch failing.
Smart Configuration Starting with AOS-W 6.5.0.0, the smart config which is used to manage
branch switches has been enhanced to allow a vlan to get an IP address
using DHCP. To configure the vlan the dhcp-client and dhcp-pool
parameters are introduced in the User VLANs table.
Static IP Management
Enhancement
Starting with AOS-W 6.5.0.0, the ZTP feature is enhanced to support 16
VLANs (Static IPManagement) per managed node as against just four in
the earlier versions of AOS-W.
Support for AOS-W VIA-
Published Subnets
This new feature allows switches to accept the subnets published by AOS-
W VIA clients. This feature is disabled by default.
Wi-Fi Calling AOS-W 6.5.0.0 supports Wi-Fi Calling in the switch. Wi-Fi calling service
allows cellular users to make or receive calls using a Wi-Fi network
instead of using the carrier’s cellular network.
Table 7: New Features in AOS-W 6.5.0.0
AOS-W 6.5.3.x | User Guide About this Guide | 29
To Next Page
Loading...