Alcatel-Lucent AOS-W 6.5.3.x - Page 396

396| Roles and Policies AOS-W 6.5.3.x| User Guide
Parameter Description
Stateful H.323 Processing Disables stateful H.323 processing.
Default: Enabled
Stateful SCCP Processing Disables stateful SCCP processing.
Default: Disabled
Only allow local subnets in user
table
Adds only IP addresses, which belong to a local subnet, to the user-table.
Default: Disabled
Session mirror IPSEC Configures session mirroring of all frames that are processed by IPsec.
Frames are sent to IP address specified by the session-mirror-
destination option.
NOTE: Use this option for debugging or troubleshooting only.
Default: Disabled
Session-tunnel FIB Enable session-tunnel based forwarding.
NOTE: Best practices is to enable this parameter only during
maintenance window or off-peak production hours.
Multicast automatic shaping Enables multicast optimization and provides excellent streaming quality
regardless of the amount of VLANs or IP IGMP groups that are used.
Default: Disabled
Stateful VOCERA Processing Disables stateful VOCERA processing.
Default: Disabled
Stateful UA Processing Disables stateful UA processing.
Default: Disabled
Enforce bw contracts for
broadcast traffic
Applies bw contracts to local subnet broadcast traffic.
Enforce TCP Sequence numbers Enforces the TCP sequence numbers for all packets.
Default:Disabled
Enforce WMM Voice Priority
Matches Flow Content
If traffic to or from the user is inconsistent with the associated QoS policy
for voice, the traffic is reclassified to best effort and data path counters
incremented.
Default: Disabled
Rate limit CP untrusted ucast
traffic (pps)
Specifies the untrusted unicast traffic rate limit. Range is 1-65535
packets per seconds (pps).
Default: 9765 pps
Rate limit CP untrusted mcast
traffic (pps)
Specifies the untrusted multicast traffic rate limit. Range is 1-65535
packets per seconds (pps).
Default: 1953 pps
Rate limit CP trusted ucast traffic
(pps)
Specifies the trusted unicast traffic rate limit. Range is 1-65535 packets
per seconds (pps).
Default: 65535 pps
Rate limit CP trusted mcast
traffic (pps)
Specifies the trusted multicast traffic rate limit. Range is 1-65535 packets
per seconds (pps).
Default: 1953 pps