In the WebUI
To create a new ARM profile with via the WebUI:
1. Select Configuration > Advanced Services > All Profiles. The All Profile Management window opens.
2. Select RF Management to expand the RF Management section.
3. Select Adaptive Radio Management (ARM) Profile. Any currently defined ARM profiles appears in the
right pane of the window. If you have not yet created any ARM profiles, this pane displays the default
profile only.
4. To create a new profile with all default settings, enter a name in the entry blank. The name must be 1–63
characters, and can be composed of alphanumeric characters, special characters, and spaces. If your profile
name includes a space, it must be enclosed within quotation marks.
5. Click Add. The new profile appears in the ARM profile list.
6. Select the name of that profile to display the current configuration settings of that profile.
Setting Description Defaults
Basic Configuration Settings
Assignment Activates one of the four ARM channel/power
assignment modes.
n disable: Disables ARM calibration and reverts
APs back to default channel and power settings
specified by the AP’s radio profile.
n maintain: APs maintain their current channel
and power settings. This setting is used to
maintain AP channel and power levels after ARM
has initially selected the best settings.
n multi-band: For single-radio APs, this value
computes ARM assignments for both 5 GHZ
(802.11a) and 2.4 GHZ (802.11b/g) frequency
bands.
n single-band: For dual-radio APs, this value
enables APs to change transmit power and
channels within their same frequency band, and
to adapt to changing channel conditions.
single-band
Allowed bands for
40MHz channels
The specified setting allows ARM to determine if 40
MHz mode of operation is allowed on the 5 GHz or
2.4 GHz frequency band only, on both frequency
bands, or on neither frequency band.
a-only
80MHz support If enabled, this feature allows ARM to assign 80 MHz
channels on APs that support VHT. This setting is
enabled by default.
enabled
Table 107: ARM Profile Configuration Parameters
AOS-W 6.5.3.x | User Guide Adaptive Radio Management | 456
To Next Page
Loading...