632| Secure Enterprise Mesh AOS-W 6.5.3.x| User Guide
If you configure multiple cluster profiles with different cluster priorities, you manually override the link metric
algorithm because the priority takes precedence over the path cost. In this scenario, the mesh portal uses the profile
with the highest priority to bring-up the mesh network.
Step 6: Configuring a DHCP Pool
In this next step, you must configure a DHCP pool where the DHCP server is on the subnet associated with
mesh private VLAN. Mesh points get their IP address from this subnet pool. To complete this task, refer to the
procedure described in Enabling Remote AP Advanced Configuration Options.
Step 7: Configuring the VLAN ID of the Virtual AP Profile
Follow the procedure described in SSIDProfiles on page 430 to configure the VLAN ID of the remote mesh AP's
SSID profile. The VLAN of this Virtual AP must have the same VLAN ID as the mesh private VLAN.
Provisioning a Remote Mesh Portal In the CLI
Reprovisioning the AP causes it to automatically reboot. When you use the CLI to reprovision a mesh node, you
may also provision other AP settings.
(host)(config) #provision-ap
read-bootinfo ap-name <name>
mesh-role remote-mesh-portal
reprovision ap-name <name>
To Next Page
Loading...