Alcatel-Lucent AOS-W 6.5.3.x - Page 667

Figure 88 Example Configuration: Campus-Wide
This example uses the “default” mobility domain for the campus-wide roaming area. Since all switches are
initially included in the default mobility domain, you do not need to explicitly configure “default” as the active
domain on each switch.
In the WebUI
On switch A (the master switch):
1. Navigate to the Configuration > Advanced Services > IP Mobility page.
2. Select the Enable IP Mobility checkbox.
3. Select the default domain in the Mobility Domain list.
4. Click Add.
5. Enter the home agent IP address, and a description for the first entry and click Add. Repeat this step for
each HAT entry.
6. Click Apply.
Home Agent Address or VRIP
10.1.1.245
10.2.1.245
10.3.1.245
10.4.1.245
Table 147: Example entries
On switches B and C:
1. Navigate to the Configuration > Advanced Services > IP Mobility page.
2. Select the Enable IP Mobility checkbox.
3. Click Apply.
AOS-W 6.5.3.x | User Guide IP Mobility | 667