672| IP Mobility AOS-W 6.5.3.x| User Guide
Parameter Description
Max. Station Mobility
Events per Second
Maximum number of mobility events (events that can trigger mobility) handled
per second. Mobility events above this threshold are ignored. This helps to control
frequent mobility state changes when the client bounces back and forth on APs
before settling down.
Range: 1-65535 events
Default: 25 events
Station Trail Timeout Specifies the maximum interval, in seconds, an inactive mobility trail is held.
Range: 120-86400 seconds
Default: 3600 seconds
Station Trail Max.
Entries
Specifies the maximum number of entries (client moves) stored in the user
mobility trail.
Range: 1-100 entries
Default: 30 entries.
Mobility Host Entry Hold
Time
Number of seconds the mobility state is retained after the loss of connectivity.
This allows authentication state and mobility information to be preserved on the
home agent switch. The default is 60 seconds but can be safely increased. In
many case a station state is deleted without waiting for the stale timeout; user
delete from management, foreign agent to foreign agent handoff, and so on. (This
is different from the no-service-timeout; no-service-timeout occurs up front, while
the stale-timeout begins when mobility service is provided but the connection is
disrupted for some reason.)
Mobility Host Entry
Lifetime
Time, in seconds, after which mobility service expires. If nothing has changed
from the previous state, the client is given another bridge entry but it will have
limited connectivity.
Revocation
Retransmits Maximum number of times the home agent or foreign agent attempts mobile IP
registration/revocation message exchanges before giving up.
Range: 0-5 retransmissions
Default: 3 retransmissions.
Interval Retransmission interval, in milliseconds.
Range: 100-10000 milliseconds
Default: 1000 milliseconds
4. Click Apply.
In the CLI
To configure foreign agent functionality, use the following command:
ip mobile foreign-agent {lifetime <seconds> | max-visitors <number> |
registrations {interval <msecs> | retransmits <number>}}
To configure home agent functionality, use the following command:
ip mobile home-agent {max-bindings <number>|replay <seconds>}
To configure proxy mobile IP and DHCP functionality, use the following command:
ip mobile proxy
auth-sta-roam-only | event-threshold <number> | log-trail | no-service-timeout <seconds> |
on-association | stale-timeout <seconds> | trail-length <number> |trail-timeout <seconds>
To configure revocation functionality, use the following command:
To Next Page
Loading...