Parameter Description
snooping
Enable IGMP snooping.
The IGMP protocol enables an router to discover the presence of multicast
listeners on directly-attached links. Enable IGMP snooping to limit the
sending of multicast frames to only those nodes that need to receive them.
Example
The following example configures IGMP proxy for VLAN 2. IGMP reports from the switch would be sent to the
upstream router on fastethernet port 1/3:
conf# interface vlan 2
conf-subif# ip igmp proxy fastethernet 1/3
Multicast Group Limit
The following table describes the maximum multicast group limit per switch platform.
Maximum multicast group is the sum of IPv4 IGMP and IPv6 MLD groups.
Platform Multicast Group Limit
OAW-4005 128
OAW-4010 256
OAW-4024 256
OAW-4030 512
OAW-4x50 Series 4096
Table 152: Multicast Group Limits
AOS-W 6.5.3.x | User Guide IP Mobility | 683
To Next Page
Loading...