Alcatel-Lucent AOS-W 6.5.3.x - Page 693

Parameter Description
Host (IP or hostname) The hostname or IP address of the PAN firewall.
Port (1 - 65535) The port number of the PANfirewall.
Username The username in the PANfirewall (1 - 255 bytes in length).
Password Enter the password of the PANfirewall.
Retype Password Retype the password of the PAN firewall.
Table 154: PAN Profile Parameters
Using the CLI
(host)(config) #pan profile <profile-name>
firewall host <host> port <port> username <username> passwd <password>
Activating a PAN Profile
Once a PAN profile has been created, the profile must be activated. Select profile you want to activate from the
list of configured profiles.
This configuration must be completed on each local switch.
Using the WebUI
To apply a PAN profile, complete the following steps:
1. Navigate to Configuration > Advanced Services > All Profiles > Other Profiles > Palo Alto
Networks Active.
2. Select Active Palo Alto Networks. To the right of this link, the name of the active profile is displayed.
3. Another configured profile can be selected from the Active Palo Alto Networks Profile > drop-down
menu. Additionally, a new profile can be configured by selecting --NEW-- and completing the configuration
details.
4. Once a profile is selected from the drop-down menu or a new profile is created, click Apply.
Using the CLI
(host)(config) #pan active-profile
profile <profile- name>
Enabling PAN Firewall Integration
PANfirewall integration must be enabled on the AAA profile that the client is associated with.
Using the WebUI
To enable PAN firewall integration in the AAA profile:
1. Navigate to the Configuration > Security > Authentication > AAA Profiles page.
2. In the AAA Profiles Summary, select the desired profile.
3. Check the PAN Firewalls Integration check box.
4. Click Apply.
AOS-W 6.5.3.x | User Guide Palo Alto Networks Firewall Integration | 693