n Blocked Sessions
n Traffic
n Threats
This feature is supported only in OAW-40xx Series and OAW-4x50 Series switches, and requires the PEF-NG license.
AppRF
AppRF is an application visibility and control feature and was introduced in AOS-W 6.4.2. AppRF performs deep
packet inspection (DPI) of local traffic and detects over 1500 applications on the network. AppRF allows you to
configure both application and application category policies within a given user role.
This tab displays the summary of all traffic in the switch. This is the default page.
Figure 142 AppRF Page
The AppRF page displays the PEF summary of all the sessions in the switch aggregated by users, devices,
destinations, applications, WLANs, and roles.The applications, application categories, and other containers are
represented in box charts instead of pie charts.
Enable DPI to enhance the benefit of the existing visualization or dashboard, To enable DPI, see the Enabling
Deep Packet Inspection (DPI) section.
To view the AppRF dashboard in the WebUI:
1. Navigate to the Dashboard > Traffic Analysis.
2. Click on the link To enable this feature, click here to enable firewall visibility. To disable, click the
Disable Firewall Visibility link at the bottom the page.
The AppRF page is displayed.
Action Bar
The Action bar displays the total traffic depending on the filters applied, allows the user to configure per
Application, per Role, and Global Policy, and includes Action buttons namely, Block/Unblock, Throttle, and QoS.
Figure 143 Action Bar
AOS-W 6.5.3.x | User Guide Dashboard Monitoring | 798
To Next Page
Loading...