Alcatel-Lucent AOS-W 6.5.3.x - Page 883

Server Type Configuration
Trivial File Transfer Protocol (TFTP) n tftphost - tftp host IPv4 / IPv6 address
n filename - absolute path of filename
n flash:- copy to the flash file system
n destination: - destination file name
n system: - system partition
n partition - partition 0 / partition 1
File Transfer Protocol (FTP) n ftphost - ftp server host name or IPv4/IPv6 address
n username - user name to log into server
n filename - absolute path of filename
n flash: - copy to the flash file system
n system: - system partition
n partition - partition 0 / partition 1
Secure Copy (SCP)
You must use the CLI to transfer files with
SCP.
n scphost - scp host of IPv4 / IPv6 address
n username - user name to secur to log into the server
n filename - absolute path of filename (otherwise, SCP
searches for the file relative to the user’s home directory)
n flash:- copy to the flash file system
n destfilename: - destination file name
n system: - system partition
n partition - partition 0 / partition 1
Table 204: File Transfer Configuration Parameters
For example, you can copy an AOS-W image file from an SCP server to a system partition on a switch or copy
the startup configuration on a switch to a file on a TFTP server, You can also store the contents of a switch’s
flash file system to an archive file which you can then copy to an FTP server. You can use SCP to securely
download system image files from a remote host to the switch or securely transfer a configuration file from
flash to a remote host.
Transferring AOS-W Image Files
You can download an AOS-W image file onto a switch from a TFTP, FTP, or SCP server. In addition, the WebUI
allows you to upload an AOS-W image file from the local PC on which you are running the browser.
When you transfer an AOS-W image file to a switch, you must specify the system partition to which the file is
copied. The WebUI shows the current content of the system partitions on the switch. You have the option of
rebooting the switch with the transferred image file.
In the WebUI
1. Navigate to the Maintenance > Controller > Image Management page.
2. Select TFTP, FTP, SCP, or Upload Local File.
3. Enter or select the appropriate values for the file transfer method.
4. Select the system partition to which the image file is copied.
5. Specify whether the switch is to be rebooted after the image file is transferred, and whether the current
configuration is saved before the switch is rebooted.
6. Click Upgrade.
In the CLI
copy tftp: <tftphost> <filename> {flash: <destfilename> |system: partition [0|1]}
copy ftp: <ftphost> <user> <filename> {flash: <destfilename> |system: partition [0|1]}
copy scp: <scphost> <username> <filename> {flash: <destfilename> |system: partition [0|1]}
AOS-W 6.5.3.x | User Guide Management Access | 883