Alcatel-Lucent AOS-W 6.5.3.x - Page 894

Profile Description
Hotspot Advertisement profile An advertisement profile defines a collection of ANQP and H2QP
profiles. Each hotspot 2.0 profile is associated with one
advertisement profile, which in turn references one of each type of
ANQP and H2QP profile.
For more information on configuring this profile, refer to
Configuring Hotspot Advertisement Profiles on page 899
ANQP 3GPP Cellular Network
profile
Use this profile to define priority information for a 3rd Generation
Partnership Project (3GPP) Cellular Network used by hotspots that
have roaming relationships with cellular operators.
For more information on configuring this profile, refer to
Configuring ANQP 3GPP Cellular Network Profiles on page 909
ANQP Domain Name profile Use this profile to specify the hotspot operator domain name.
For more information on configuring this profile, refer to
Configuring Hotspot Advertisement Profiles on page 899
ANQP IP Address Availability
profile
Use this profile to specify the types of IPv4 and IPv6 IP addresses
available in the hotspot network.
For more information on configuring this profile, refer to
Configuring ANQP IPAddress Availability Profiles on page 905
ANQP NAI Realm profile An AP’s NAI Realm profile identifies and describes a Network
Access Identifier (NAI) realm accessible using the AP, and the
method that this NAI realm uses for authentication.
For more information on configuring this profile, refer to
Configuring ANQPNAIRealm Profiles on page 906
ANQP Network Authentication
profile
Use the ANQP Network Authentication profile to define the
authentication type used by the hotspot network.
For more information on configuring this profile, refer to
Configuring ANQP Network Authentication Profiles on page 903.
ANQP Roaming Consortium
profile
Name of the ANQP Roaming Consortium profile to be associated
with this WLAN advertisement profile.
For more information on configuring this profile, refer to
Configuring ANQP Roaming Consortium Profiles on page 909
ANQP Venue Name profile Use this profile to specify the venue group and venue type
information be sent in an Access network Query Protocol (ANQP)
information element in a Generic Advertisement Service (GAS)
query response.
For more information on configuring this profile, refer to
Configuring ANQP Venue Name Profiles on page 901.
H2QP Connection Capability
profile
Use this profile to specify hotspot protocol and port capabilities.
For more information on configuring this profile, refer to
Configuring H2QP Connection Capability Profiles on page 910
H2QP Operating Class
Indication profile
Use this profile to specify the channels on which the hotspot is
capable of operating
For more information on configuring this profile, refer to
Configuring H2QP Operating Class Indication Profiles on page 913
Table 206: ANQP and H2QP Profiles referenced by an Advertisement Profile
AOS-W 6.5.3.x | User Guide 802.11u Hotspots | 894