Alcatel-Lucent AOS-W 6.5.3.x - Page 900

One Instance per Advertisement
Profile
Multiple Instances per Advertisement Profile
n ANQP IP address availability
profile
n H2QP WAN metrics profile
n H2QP connection capability profile
n ANQP venue name profile
n ANQP network authentication profile
n ANQP foaming consortium profile
n ANQP NAI realm profile
n ANQP 3GPP cellular network profile
n H2QP operator friendly name profile
n H2QP operating class indication profile
n ANQP domain Name profile
n H2QP OSU Providers List Settings
Table 209: Hotspot Advertisement Profile Associations
For more information on each of these profile types, see Hotspot Profile Types on page 893
Configuring an Advertisement Profile
The steps below describe the procedure to associate an advertisement profile to a set of ANQP and H2QP
profiles. Note that the procedure to associate an ANQP or H2QP profile to an advertisement profile varies,
depending upon whether the advertisement profile can reference just one instance or many instances of that
profile type
In the WebUI
To configure an advertisement profile from the switch WebUI:
1. Navigate to Configuration>Advanced Services>All Profiles.
2. In the Profiles list, click Wireless LAN expand the Wireless LAN profiles section.
3. Select Advertisement.
4. Select an existing advertisement profile from the list of profiles in the Profiles list. pane or create a new
advertisement profile by entering a profile name into the entry blank on the Profile Details pane, then
clicking Add. The ANQP and H2QPprofiles associated with the selected advertisement profile appear below
the advertisement profile in the Profiles list.
5. Define the OSUSSID. This is the SSID of the OSENAPor any other AP that will be used for the sign-up
process.
6. For an ANQP or H2QP profile type that can have only one instance associated with the advertisement
profile:
a. In the Profiles list, select the ANQP or H2QP profile type.
b. Click the drop-down list in the Profile Details pane and select a profile name.
7. For an ANQP or H2QP profile type that can have multiple instances associated with the advertisement
profile:
a. In the Profiles list, select the ANQP or H2QP profile type.
b. In the Profile Details pane, click the Add a Profile drop down list.
c. Select the name of the profile to associate with the advertisement profile.
d. click Add.
e. (Optional) To remove an existing reference to an ANQP or H2QP profile, select the profile name in the
Profile Details pane, then click Delete.
8. Click Apply .
AOS-W 6.5.3.x | User Guide 802.11u Hotspots | 900