934| Voice and Video AOS-W 6.5.3.x| User Guide
You can also add this ACL to any user role or port.
To apply the ACL to a user role:
a. Navigate to Configuration > Security > Access Control page and click the User Roles tab.
b. Edit the user role and click Add under Firewall Policies.
c. Select the ACL from the Choose From Configured Policies drop-down menu and click the Done
button.
d. Click Apply to save the configurations.
To apply the ACL to a port:
a. Navigate to Configuration > Network > Port and select the upstream port.
b. Under the Firewall Policy drop-down menu, select the ACL.
c. Click Apply.
4. Configure dynamic multicast optimization for video traffic on a virtual AP profile:
Under the Profiles column, expand Wireless LAN > Virtual AP Profile and select the profile name. This
example uses the default profile. In the Profile Details section, select the Dynamic Multicast
Optimization (DMO) option and enter the threshold value.
5. Configure multicast rate optimization for the video traffic:
a. Navigate to Configuration > Advanced Services > All Profiles.
b. Under the Profiles column, expand Wireless LAN > SSID Profile and select the profile name.
c. Click the Advanced tab and select the BC/MC Rate Optimization check box.
d. Select an option from the Video Multicast Rate Optimization drop-down menu.
e. Click Apply.
Configuring the Video Multicast Rate Optimization parameter overrides the configuration of BC/MC Rate
Optimization parameter for VI-tagged multicast traffic. Multicast traffic that is not VI-tagged behaves the same with
BC/MC as before. If multicast rate is not set, all traffic behaves the same.
6. Configure ARM scanning for video traffic:
Under the Profiles column, expand RF Management > Adaptive Radio Management (ARM) Profile
and select the profile name. This example uses the default profile. Select the Video Aware Scan option and
click Apply.
7. Configure and apply bandwidth management profile:
Under the Profiles column, expand Virtual AP >[profile-name] > WMM Traffic Management Profile. In
the Profile Details section, select the profile name from the drop down list box. Select the Enable
Shaping Policy option and enter the bandwidth share values. Click Apply.
This step is optional.
Ensure that you configure the WMM traffic management profile to the virtual AP profile, if you have configured the
virtual AP traffic management profile.
After you configure the WMM bandwidth management profile, apply it to the virtual AP profile.
8. Enable multicast shaping on the firewall:
a. Navigate to Configuration > Advanced Services > Stateful Firewall.
b. Click the Global Setting tab and select the Multicast automatic shaping check box.
c. Click Apply.
To Next Page
Loading...