978| Voice and Video AOS-W 6.5.3.x| User Guide
Understanding Dial Plan Format
The format of a SIP dial plan is <sequence> <pattern> <action>.
n sequence—is a number between 100 and 65535. The sequence number positions the dial plan in the list of
dial plans configured in the switch.
n pattern—is the digit pattern or the number of digits that will be dialed by the user. You can specify digit
pattern using ‘X’, ‘Z’, ‘N’, ‘[]’, and ‘.’.
l X is a wild card that represents any character from 0 to 9.
l Z is a wild card that represents any character from 1 to 9.
l N is a wild card that represents any character from 2 to 9.
l . (period) is a wild card that represents any-length digit strings.
n action—is the prefix code that is automatically prefixed to the dialed number. This is specified as <prefix-
code>%e. Examples of prefix codes are:
l 9%e: The number 9 is prefixed to the dialed number.
l 91%e: The number 91 is prefixed to the dialed number.
Dialplan
Pattern
Action Description
XXXX %e When the user dials a four digit number, no action is taken and the call is
allowed.
XXXXXXX 9%e When the user dials a seven digit number, a nine (9) is prefixed to that
number and the call is executed.
Example, if the user dials 2274500, the call is executed by adding 9 to the
number, 92274500.
XXXXXXXXXX 91%e This dial plan prefixes 91 to the dialed number.
Example, call to 4082274500 will be executed as 914082274500.
+1XXXXXXXXXX 9%e This dial plan replaces ‘+’ with 9 and executes the call.
Example, call to +14082274500 is executed as 914082274500.
+. 9011%e This dial plan removes ‘+’ and prefixes 9011 for an international call.
Example, call to +886212345678 is executed as 9011886212345678.
Table 238: Examples of Dial Plans
Configuring Dial Plans
You can configure a maximum of two dial plan profiles and maximum of 20 dial plans per profile. The dial plan
must be associated to a SIP ALG configuration.
To configure a dial plan for SIP devices:
1. Create a voice dial plan.
2. Associate the dial plan with SIP ALG.
In the WebUI
1. In the WebUI, navigate to Configuration > Advanced Services > All Profiles > Switch > Dialplan
Profile. Enter a name for the dial plan profile and click Add.
To Next Page
Loading...