I-2 Index
Publication 0160-5.18 - June 2003
L
LEDs, see COMM LED, FAULT LED or READY LED
M
modes of operation
error mode, 4-2
power-up reset mode, 4-1
run mode, 4-2
modifying drive reset functions, 6-8
module installation, 3-1
N
Non-Volatile Storage (NVS), 6-23
O
output assemblies
Instance Data Format for, B-24 to B-25
selecting, 6-5
P
parameters, 5-3 to 5-10
PLC-5
example I/O messaging program, 6-19
formatting Explicit Messages, 6-26
Polled data exchange
configuring scanner for, 6-12
power-up reset mode, 4-1
Q
quick start
for experienced users, 2-1
R
READY LED
locating and description, 7-1
removing communication module, 3-10
removing keypad, 3-5
removing Read/Fault panel, 3-5
required equipment, 3-1
run mode, 4-2
S
scanner
configuring for Polled, COS or Cyclic, 6-12
mapping the drive data, 6-13
setting up the scan list, 6-11
SLC
example I/O messaging program, 6-21
formatting Explicit Messages, 6-26
specifications, A-1
start-up instructions, 2-1
status LEDs, see COMM LED, FAULT LED or
READY LED
surge suppression, 3-2
switches
locating and factory settings, 3-5
T
tools required, 3-1
troubleshooting, 7-1
W
wiring
communication module, 3-9
DeviceNet connector, 3-9
To Next Page
Loading...
Need help?
General
