Publication 1756-UM514B-EN-P - February 2003
A-2 Specifications
EFT/B Immunity IEC 61000-4-4:
±2kV at 5kHz on communications ports
Surge Transient Immunity IEC 61000-4-5:
+2kV line-earth (CM) on shielded ports
Conducted RF Immunity IEC 61000-4-6:
3Vrms with 1kHz sine-wave 80%AM from 10kHz to 80MHz
10Vrms with 1kHz sine-wave 80%AM from 150kHz to
80MHz
Enclosure Type Rating None (open-style)
Conductors:Wiring
Category
Belden 9463 twinaxial
2
(1)
Agency Certification
(when product or packaging
is marked)
UL UL Listed Industrial Control Equipment
CSA CSA Certified Process Control Equipment
CSA CSA Certified Process Control Equipment for Class
I, Division 2 Group A,B,C,D Hazardous Locations
CE
(2)
European Union 89/336/EEC EMC Directive,
compliant with:
EN 50081-2; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
C-Tick
(2)
Australian Radiocommunications Act, compliant
with:
AS/NZS 2064; Industrial Emissions
EEx
(2)
European Union 94/9/EEC ATEX Directive,
compliant with:
EN 50021; Potentially Explosive
Atmospheres, Protection “n”
(1)
Use this conductor category information for planning conductor routing as described in system level installation manual. Also
refer to 1770-4.1, Industrial Automation Wiring and Grounding Guidelines.
(2)
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
To Next Page
Loading...
