220 Rockwell Automation Publication MOTION-UM002F-EN-P - February 2018
See also
Use Common Cam Profiles on page 219
A run cam profile determines a slave axis’ movement that begins when the master
axis reaches a specific position and remains steady until the end of the cam profile.
This graphic illustrates a sample run cam profile in the Logix Designer
programming software Cam Editor.
See also
Use Common Cam Profiles on page 219
A deceleration cam profile determines a slave axis’ deceleration from a particular
position. This graphic illustrates a sample deceleration cam profile in the Logix
Designer programming software Cam Editor.
To Next Page
Loading...
