1761-6.5
Operation
3-5
Programming Over DeviceNet
PCCC/DF1 messaging allows programming devices to connect to
DeviceNet, and upload/download/monitor and even edit programs (if the
controller attached to the destination DNI supports that functionality).
Rockwell Software RSLogix 500/RSLinx (version 2 and higher) users can
even connect directly to DeviceNet (using a KFD, PCD, or PCI interface).
Local Access to DeviceNet
Or they can use a DNI connected to the computer’s RS-232 port and upload/
download to other controllers connected to DNIs on DeviceNet. See page
6-6 for programming procedures.
KFD
DeviceNet
Cable
MicroLogix
Controller
Upload/Download
Monitoring
DNI Configuration
IBM Compatible
Upload/Download
Monitoring
DNI Configuration
MicroLogix
Controller
DeviceNet
Cable
DNI Module
RS-232
DF1
IBM Compatible
AB Parts
To Next Page
Loading...
Need help?
General
