1761-6.5
4-2
Installation and Wiring
Safety Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D,
or non-hazardous locations only.
Use only the following communication cables and replacement connectors
in Class I, Division 2, Hazardous Locations.
!
ATTENTION:
Explosion Hazard
•
Substitution of components may impair suitability for Class
I, Division 2.
•
Do not replace components unless power has been switched
off and the area is known to be non-hazardous.
•
Do not disconnect connectors unless power has been
switched off and the area is known to be non-hazardous.
Environment Classification Communication Cables
Class I, Divisi on 2 H aza rdous Environment
1761-CBL-PM02 Series C (or late r)
1761-CBL-HM02 Series C (or later)
1761-CBL-AM00 Series C (or later)
1761-CBL-AP00 Series C (or later)
1761-RPL-00 Devic eNet Connector
To Next Page
Loading...
