Finding information about instructions and ladder elements Chapter 1
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015 27
Instruction Functional category
UIE on page 426
UIF on page 428
XOR_MASK on page 146 Binary instructions on page 131
Operators
The following table lists the operators by functional category.
Instruction Functional category
Addition on page 68 Arithmetic instructions on page 61
AND on page 157 Boolean instructions on page 149
ANY_TO_BOOL on page 278 Data conversion instructions on page 277
ANY_TO_BYTE on page 279
ANY_TO_DATE on page 280
ANY_TO_DINT on page 281
ANY_TO_DWORD on page 282
ANY_TO_INT on page 282
ANY_TO_LINT on page 284
ANY_TO_LREAL on page 285
ANY_TO_LWORD on page 286
ANY_TO_REAL on page 287
ANY_TO_SINT on page 288
ANY_TO_STRING on page 289
ANY_TO_TIME on page 290
ANY_TO_UDINT on page 291
ANY_TO_UINT on page 292
ANY_TO_ULINT on page 292
ANY_TO_USINT on page 294
ANY_TO_WORD on page 294
Division on page 80 Arithmetic instructions on page 61
Equal on page 260 Compare instructions on page 259
Greater Than on page 262
Greater Than or Equal on page 263
Less Than on page 264
Less Than or Equal on page 265
MOV on page 88 Arithmetic instructions on page 61
Multiplication on page 89
Neg on page 90
NOT on page 159 Boolean instructions on page 149
To Next Page
Loading...
