Input/Output instructions Chapter 15
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015 409
RTC data type
The following table describes the RTC data type.
Parameter Data type Description
Year UINT The year setting for the RTC. 16-bit value, and the valid range is from
2000 (Jan 01, 00:00:00) to
2098 (Dec. 31, 23:59:59)
Month UINT The month setting for the RTC.
Day UINT The day setting for the RTC.
Hour UINT The hour setting for the RTC.
Minute UINT The minute setting for the RTC.
Second UINT The second setting for the RTC.
DayOfWeek UINT The day of the week setting for the RTC. This parameter is ignored for RTC_SET.
To Next Page
Loading...
