Input/Output instructions Chapter 15
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015 399
PLUGIN_RESET resets any Plug-in Generic Module hardware except 2080-
MEMBAK-RTC modules. After the hardware reset, the Plug-in Generic Module
is ready for configuration and operation.
Arguments
Parameter
Parameter
type
Data type Description
Enable Input BOOL Function block enable.
When Enable = TRUE, execute Plug-in reset.
When Enable = FALSE, there is no reset operation.
SlotID Input UINT Plug-in slot number.
Slot ID = 1,2,3,4,5 (starting with the far left slot = 1).
Sts Output UINT See PLUGIN_READ status codes on page 398.
ENO Output BOOL Enable out.
Applies only to LD programs.
PLUGIN_RESET function block language examples
Function Block Diagram (FBD)
Ladder Diagram (LD)
To Next Page
Loading...
