Chapter 15 Input/Output instructions
368 Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
LCD_REM status codes
Status code Description
0 Enable input is false.
1 User Message displayed successfully.
2 Remote LCD not detected.
May occur when:
• Remote LCD is not physically connected to the controller (or the wiring is
incorrect).
• Serial port settings are other than what is required for the Remote LCD.
3 Connection error.
May occur when there is an internal state machine error. (Possibly caused by
an incompatibility between Controller FW version and RLCD FW version.
4 Invalid font code.
5-65535 Reserved.
To Next Page
Loading...
