Rockwell Automation Publication 2080-RM001D-EN-E - February 2015 277
Chapter 12
Data conversion instructions
Data conversion instructions are used to convert the data type of a variable to a
different data type.
Operator Description
ANY_TO_BOOL on page 278 Converts to Boolean
ANY_TO_BYTE on page 279 Converts to BYTE
ANY_TO_DATE on page 280 Converts to Date
ANY_TO_DINT on page 281 Converts to Double Integer
ANY_TO_DWORD on page 282 Converts to Double Word
ANY_TO_INT on page 282 Converts to Integer
ANY_TO_LINT on page 284 Converts to Long Integer
ANY_TO_LREAL on page 285 Converts to Long real
ANY_TO_LWORD on page 286 Converts to Long Word
ANY_TO_REAL on page 287 Converts to Real
ANY_TO_SINT on page 288 Converts to Short Integer
ANY_TO_STRING on page 289 Converts to String
ANY_TO_TIME on page 290 Converts to Time
ANY_TO_UDINT on page 291 Converts to Unsigned Double Integer
ANY_TO_UINT on page 292 Converts to Unsigned Integer
ANY_TO_ULINT on page 292 Converts to Unsigned Long Integer
ANY_TO_USINT on page 294 Converts to Unsigned Short Integer
ANY_TO_WORD on page 294 Converts to Word
To Next Page
Loading...
