Chapter 15 Input/Output instructions
398 Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
PLUGIN_READ status codes
The following table describes status codes for the PLUGIN_READ function
block.
Status code Status description
0x00 Function block not enabled (no operation).
0x01 Plug-in operation success.
0x02 Plug-in operation fails due to an invalid Slot ID.
0x03 Plug-in operation fails since it is not a valid Plug-in Generic module.
0x04 Plug-in operation fails due to data operated out of range.
0x05 Plug-in operation fails due to a data access parity error.
To Next Page
Loading...
